Jacob Freeman of EVGA Google + fame recently posted a teaser photo of a certain shiny piece of X79 chipset baked silicon in the form of a new SR3 Super Record series motherboard. This monster of a board is packed to the brim with features, and mid tower cases need not apply.
Starting at the top of the board and working our way down, we are presented with not one but two socket 2011 Sandy Bridge-E Xeon processor sockets! One processor will have access to eight DDR3 DIMM slots while the other will have access to four DDR3 DIMM slots. While the RAM configuration may seem odd, EVGA wanted to make the transition from the boards SR2 predecesor as easy as possible, by allowing users to transfer all 12, triple channel DIMMs to the new SR3 motherboard. When all 12 RAM slots are populated, the board will run in triple channel mode, and when four or eight slots are populated, the motherboard will utilize the new quad channel interface. The RAM will be fed power via a eight phase PWM (pulse width modulation) circuitry. The board also features two eight pin EPS and two six pin PCI-E connectors, and seven PCI-E 3.0 slots that are all capable of running at least PCI-E 3.0 x8 and four of them are capable of providing PCI-E 3.0 x16 bandwidth, more than enough for even the beefiest SLI setup.
On the storage and IO front, the SR3 motherboard has 14 SATA ports, HD Audio via six 3.5mm jacks, USB 3.0 ports (the total amount is unclear), and eSATA support. The bottom right corner of the board lies a handy diagnostic screen to report error codes. Further, the motherboard will come with the new UEFI BIOS. Mr. Freeman states that the x79 motherboard is fully furnished with solid state capacitors from Sanyo (specifically POSCAP).
In short, this motherboard is a total beast. Please excuse me as I try to remove my jaw from the floor cartoon style.