PCPer File Copy Test
Our custom PCPer-FC test does some fairly simple file creation and copy routines in order to test the storage system for speed. The script creates a set of files of varying sizes, times the creation process, then copies the same files to another partition on the same hard drive and times the copy process as well. There are four file patterns that we used to try and find any strong or weak points in the hardware: 10 files @ 1000 MB each, 100 files @ 100 MB each, 500 files @ 10 MB each and 1000 files at 1 MB each.
The Patriot duo did very well on file creation – pushing past not only other SandForce drives, but past the OCZ Octane as well.
File copies were right in line with other SandForce units.
Hi Allyn & crew,
Nice review,
Hi Allyn & crew,
Nice review, but have you ever tested any IDE (PATA) SSDs? I bought a RunCore SSD (Model 0900027140 32GB)and have tried almost everything (I get a BSOD) and can only get into the Safe Mode. I know IDE is old, but I was trying use one in an old SONY PCG-V505DC1 laptop and have never been able to boot into Windows XP. Whether I start with a fresh install or using Norton Ghost, Casper 6 or Acronis True Image, the results are the same (BSOD).
It seems to me that either the drivers are wrong or a firmware update is need. I’ve contacted RunCore, but so far no good answer. The funny thing is, I tried this SSD (via and IDE/USB cable) on my MacBook Pro (using Super Duper) and it works just fine.
Have you any suggestions?
Thanks,
Bernie
It’s likely that your aging
It’s likely that your aging Sony lacks the necessary compatibility to handle the RunCore SSD – or vice versa.
@Bernie
IDE SSDs are rare,
@Bernie
IDE SSDs are rare, slow, and expensive for the size/performance you get. Adding an IDE SSD to an old laptop is not a good idea because Windows XP does not support SSDs as well as Windows 7 and new operating systesms, and the value of the SSD is likely to be higher than the old IDE device you are installing it in. If you have a system that only takes IDE drives, then your first priority should be to update to a SATA based laptop or new motherboard/CPU for a desktop. You can then later add a SATA based SSD to the system to increase performance.
Even if your SONY PCG-V505DC1 could take a SATA SSD, it will suffer from other bottle necks that would diminish the value and advantage that an SSD would provide.
It would be nice if you could
It would be nice if you could remind us which of these tests use random data, so we can tell how much of the difference is due to compression by the Sandforce controller that won’t apply to previously compressed files.
Any reason server operators shouldn’t expect expect longer life (more write cycles) from 32nm than 25nm? Performance is not the only criterion.
Doesn’t the Pyro only get 60k
Doesn’t the Pyro only get 60k iops, and it’s the Pyro SE that gets 85k iops isn’t it? Great review, been looking at the different Pyro’s for my first SSD, might bite the bullet one day!