H80i High Performance Liquid CPU Cooler Overview
Features
Courtesy of Corsair
- Self-contained Cooling System
- Built-In Corsair Link
- Tool-free multiplatform magnetic mounting bracket kit
- Large-diameter, low permeability tubing
H80i Cooler Layout
The Hydro Series™ H80i cooling system consists of an aluminum-based 120mm x 120mm x 38mm radiator capable of supporting two 120mm x 120mm fans, attached to a CPU copper-based cooling assembly via 3/8 inch rubber hoses. The CPU cooler contains embedded magnets to better hold the CPU clip to the body of the cooling assembly. The cooling hoses are attached to the CPU assembly by rotating nozzles, capable of almost a full 360 degrees of rotation.
The H80i comes standard with two 120mm x 120mm x 25mm fans that are mounted to the unit in a push-pull configuration for maximum cooling airflow.
The H80i's CPU contact area is a pure copper-based cold plate, with the pump, Corsair Link™, and LED electronics and ports sitting atop the cold plate itself. Additionally, the block has a coolant drainage port included. The pump, LED, and fans are powered via the attached SATA power cable with pump speed monitoring provided by the 3-pin fan cable.
Technical Specifications (taken from the Corsair website)
Radiator dimensions |
120mm x 152mm x 38mm |
Fan dimensions |
120mm x 120mm x 25mm |
Fan speed |
2700 RPM |
Fan airflow |
77 CFM |
Fan dBA |
37.68 dBA |
Fan static pressure |
4mm/H20 |
Okay let us just say this, we
Okay let us just say this, we almost exclusively sell Corsair Coolers for two reasons. One, they are one of the rare companies who actually stand behind their products 100%. And two, these units are of VERY high quality. With that being said, we are gearing up to include all of these units in our Corsair Combo Kits because of those two main reasons.
We are very proud of Corsair for improving on the few area’s that were of concern to us. We have been testing some of these for a while now, and man are we happy with them. We have yet to get a single unit that has an issue. Concerning the H80i and H100i. If you read the reviews on Newegg, and Amazon though I think people were on Drugs or just plain lying because out of the hundred plus units we have gone through I have to admit, there should be 100% satisfaction. This is why those who are into getting the real low-down should not trust “buyer” review sits like those, and only put their trust in Genuine Reviewers who obviously have integrity like PCPER.
Regards,
TB
“these units are of VERY high
“these units are of VERY high quality.”
Which is why a number of Corsair AIO’s (especially the H50 and the H80) have either had their pumps fail or leak in months time… very high quality my ass. I haven’t had a single issue with either my H100 nor my H80 I’ve been using on my secondary machine for 1.5 years, they’ve been pretty nice so far.
Though, the Swiffy H220 IS going to blow and kick the dog shit out of these coolers out of the water… it has a pump similar to the MCP35x, which pushes A TON of more head pressure and GPM than the weak arse 50-75 GPM pumps of the Corsair AIO’s. Not to mention that it’s going to be priced head-to-head with the H100i. Corsair has some serious worries about it already.
Personally, I’m done with ANY AIO. Building your own is the way to go period. Why? Because once you buy an AIO, a better one comes in and you replace the entire kit to buy a new one again. For the price of TWO AIO’s, you can build a great loop. AIO’s are non-expandable, somewhat unreliable/cheaply made (especially the little plastic hoses used on the H50/70/80/100 etc.) and poor bang for the buck when compared to high-end air, and also have worse noise profiles than huge air coolers. The only thing good about AIO is that it makes for a clean setup and is easy to setup as there’s nothing you need to maintain…
I agree with you. Needed to
I agree with you. Needed to replace my h100i. Got a new one from company sold it to someone else and just got a high end air cooling. Same temps less problems.
I wish PCPer had included
I wish PCPer had included results from Corsair’s previous line of water coolers such as my H100. I’m curious to know just how much of an improvement in real life their new line is. I’m still 100% happy with my H100 a year down the road btw. It’s been perfect.:)
The performance difference
The performance difference between the old and new versions is probably not drastic (like ~5%) but that's just a best guess-timate. The biggest differnce is the change in manufacturer from the old version to new version – old was made by Asetek, new one is from Cool IT.
As I had elaborated in the review, there is bigger performance difference between the H80 and H100 because of the radiator thickness. That is what got the H80i the reward and kept my thoughts on the H100i only so so…
my h80i keeps my i5
my h80i keeps my i5 2500k(stock) at min 22c max 42c, at 4.5GHz min 26 max 53c, this are just gaming temps.
Guys, I have to agree that
Guys, I have to agree that short-term, Corsair coolers are great. But long term, I had a H60, and H80 both leak on me after extended use. Corsair was aware of this, and maybe that is why they switched from Asetek to Cool IT.
Not sure that I would
Not sure that I would classify this as an Asetek issue. I have used the Antec cooler for quite a while with zero issues. I also have an Intel cooler, again Asetek design that has zero issues as well as the AMD cooler.
Not sure that I would
Not sure that I would classify this as an Asetek issue. I have used the Antec cooler for quite a while with zero issues. I also have an Intel cooler, again Asetek design that has zero issues as well as the AMD cooler.
They seem to be pretty
They seem to be pretty effective coolers but I’m still slightly nervous of the dissimilar metals. I’ve used an Asetek based system for nigh on 2 years now with no problems but the worry still lingers.
Unfortunately, the only way
Unfortunately, the only way to know for sure with a failed system is to break it open or if it starts leaking. However, if you have not had any noticeable performance degradation in the cooling capability of the unit, its a good bet that the galvanic corrosion is under control (ie, the internal fluid has not broken down completely)…
Galvanic corrosion is easily
Galvanic corrosion is easily avoided with a cheap bottle of corrosion blocker chemical. Obviously, Asetek and Cool IT and other companies have been doing this for a while and know exactly what needs to be done to avoid the problem.
I have an EK-KIT H3O Supreme HF 360 water cooling system that’s been running for over two years now with no maintenance whatsoever. Like the Corsair closed-loop systems, it has a copper water block and an aluminum radiator (note that 99% of water cooling systems are like this). I filled it with distilled water, added Feser Base Corrosion Blocker and a silver coil for bio-cide, and that’s it. No cleaning has been done, and I haven’t added any water to the loop. The system runs 16-18 hours per day, every day. There has been no loss in cooling efficiency, and temps have been stable the entire time. The water level in the reservoir has dropped about an inch or so since I first filled it, but that kind of evaporation is to be expected when using the standard thin-wall clear tubing that came with the kit.
Note that the EK system isn’t designed to be no-maintenance. They recommend draining, cleaning, and re-filling the system once a year. I’ve just been using this as a test bed since I first became curious about water cooling a couple of years ago. I’ve been an overclocker for many years, but I had always used monster air coolers before I got the EK system.
Put the thought of galvanic corrosion out of your mind. Pump failure and leaks are more likely to be the source of problems for closed-loop systems like the Corsair H series. Even those are low-percentage problems, so the vast majority of users won’t ever experience them.
You’ve gotten lucky my
You've gotten lucky my friend. The reason why they recommend once a year clean-out and refill is because the chemicals do and will break-down over time, losing their effectiveness. I've been water-cooling rigs for many, many years – some are problematic and some are not. Unforturnately, there are too many factors at play to reliably say that it will or will not happen (corrosion that is). The old motto still stands – an ounce of prevention is better than a pound of cure…
I got the H100i for X-mas,
I got the H100i for X-mas, now I just need a new CPU and MoBo for it.
Will we see a comparison with
Will we see a comparison with other closed loop systems?
Antec kuhler 620 & 920
NZXT Kraken X40 & X60
Thermaltake Water series
Or get your hands on the Swiftech H220 🙂
These coolers blow the other
These coolers blow the other AIO’s away. The fans push more pressure, the pumps are stronger so are the hoses which are all elastic and bigger.
The Thermaltake Water 2.0 Extreme used to be THE best AIO out there, though, it got outdone by the H100i so no point in buying any of the other AIO’s, or best yet, any of these AIO’s at all.
The Swiffy H220 is more of a something in between AIO and a real loop and is going to beat all these things by a significant margin anyway.
Oddly enough, the middle tier
Oddly enough, the middle tier one (the H80i) performed best overall most likely due to the radiator thickness. The H100i would be killer with a dual fan and radiator as thick at the H80i…
that’s what the thermaltake
that’s what the thermaltake water 2.0 extreme is, the asetek 2011c.
Morry would you be able to
Morry would you be able to re-test the H80i and H100i in a closed case?
Linus tested the H100i and H80i in a closed case and as far as I can tell is the only one to show a good difference between the two (the H100i comes out on top)
Unfortunately, the H100i had
Unfortunately, the H100i had its BIOS bricked while testing (as mentioned in the conclusion) and the H80i was disassembled (and broke as a result) for the deconstruction follow-up article.
However, I would be surprised if the performance difference between the two was more than 1-2C even in a closed case situation. The increased thickness of the H80i more than makes up for its lack of length/fans in comparison to the H100i.
In-case performance of the coolers would also be affected by the amount of incoming and ongoing fans that exist in the case besides those of the cooler because of pressure dynamics -> negative case pressure will cause the cooler's fan to push less air out while positive internal pressure would force more air through the cooler.
Linus’ results are bogus in
Linus’ results are bogus in the “best cpu cooler final answer” video.
He clearly says that he will use the nf-a15’s when testing the silver arrow and ends up using the nf-f12’s (silver arrow is a 140mm cooler).
Most results i’ve seen show only a 2-3 celsius difference between the h100i and the h80i. Linus showed a 14 celsius difference… 14!!!! Lol anyone?
That video was clearly made to sell h100i’s.
I am a Linus fan too… but don’t be fooled, he is a straight up salesman.
He will say whatever they tell him to say.