Benchmark Testing
Synthetic Benchmark Testing
SiSoft Sandra 2012
The Sandra benchmarks are a fast and easy to determine how well the system's CPU and memory are functioning. The Z87X-OC Force motherboard performs within expectations in comparison to the other Z87-based systems. While its memory numbers are a bit lower than expected, they are within tolerances and indicate that both the CPU and memory subsystems are working optimally.
LinX
LinX is a graphical interface for CPU-based testing using the Intel Linpack benchmarks. It serves as a good indicator of proper system CPU functioning and is considered one of the most intensive CPU benchmarks currently available. LinX was run with Memory set to All and for a total of 3 runs. This test was repeated three times with the highest repeatable GFlops (Giga-Floating Point Operations Per Second) score recorded.
This CPU torture test is good for proving out how well the CPU to motherboard interface is designed. The Z87X-OC Force performs well within thresholds, again proving proper CPU operation.
Multimedia and System Benchmark Testing
Handbrake
Handbrake was used to convert an uncompressed version of the Iron Man Blu-ray movie in MKV format to a compressed 720P MP4 format. The Iron Man MKV file was ripped from the Blu-ray disc in the past with the file size for the uncompressed media coming in at 26 GB. Handbrake was run with default settings enforced with the exception of Anamorphic set to Loose and Video width set to 1280. This test was repeated three times with the lowest repeatable conversion time recorded.
Video encoding is one of the more system intensive operations with good performance in the benchmark indicative of similar board performance. The Z87-OC Force performs brilliantly, just sneaking in to first place.
Maxon Cinebench 11.5
Maxon’s Cinebench 11.5 benchmark can be used determine a system's ability to render 3D content based on their Cinema 4D animation software. The CPU benchmark test was run three times, with the highest reproducible Cinebench points score recorded.
The Z87X-OC Force easily sticks close to the other Z87-based systems, no surprises here.
PCMark 7 Professional
Future Mark Corporation’s PCMark 7 can be used to reliably ascertain a given system’s performance in a Windows 7-based non-gaming type use environment. The professional version of the benchmark test was run three times, with the highest reproducible PCMark scores recorded.
The Z87X-OC Force manages a strong finish in this business-centered benchmark suite. In only a single cases does it fall significantly behind the other Z87 board.
My current build is a
My current build is a Gigabyte GA800GA board with AMD Rhenom 6 core processor and 4 x 4gb g-skil DDR5 rip jaw memory and 2GB Radeon graphics card. Theres 10 x 2TB Caviar Green as well as
8 External HDD’s making a total of 38 Terabytes.
This runs through built in Ceiling speakers fed from a Technics Class AA Amplifier….. a 42 inch Panachronic Monitor as well as 2x Hanns-G HH251 25 inch monitors (really BAD monitors compared to the smaller 21″ Acer’s they replaced as the ancient non HD Acer are FAR superior in every way but screen size even after ten years of use).
I intend to get a huge case.. probably the Caselabs MAGNUM M8 Case as my space is height critical and the Lian Li monster is just too tall
what I’m trying to find out is the absolute BEST motherboards for huge archives of Audio Visual and Photoshop creations etc… Best CPU and Mem and so on
I know this will cost in excess of £2000 as the build above I managed all for £1500 (bar the big Panasonic screen)
I intend to max out the case with something between 15 and 20 4TB Caviar Blacks
I have no interest…or ever will in high end gaming….
my limit is the old space invaders and table top games you used to see in pubs lol
Nor have I any intention of elaborate looking dust trap chassis… hence the clean lined monster mentioned above
any ideas or further input will be gratefully received as I really am a total novice and it was more LUCK on first build attempt
This build absolutely MUST not cut corners on tech in so much as I wont be updating software for some YEARS after this kind of outlay (if all that makes sense)
I’m lost with all tech pointing to high gaming etc…. unless someone can confirm or deny for MY purposes I should be looking for the same spec despite main use as mass entertainment archive heavy webby use and photoshop work
I meant GA-880 motherboard
I meant GA-880 motherboard not 800
If you’re looking for
If you're looking for high-end performance, you *might* want to consider an X79 based board. However, that would require the use of an LGA2011-based CPU which are a bit more expensive than their 1150 or 1155 counterparts. X79 does have the benefit of quad-channel DRAM support though, which may be useful if you are doing intensive photo and graphics manipulation jobs and rendering.
Don't get me wrong, the LGA1150 adn LGA1155 systems are good, but they are memory limited to a maximum of 32MB and support dual-channel mode.
Thanks Morry
To be clear once
Thanks Morry
To be clear once again…. I’m not limiting the costings
for example if the BEST x79 is vastly superior to the AMD Phenom six core (maxed with 4x4gb 16gb memory) I’m currently running then they are the prices I simply MUST start from
I’m definately intending on a “double sized” case like those mentioned… clean lines and will FILL itwith 4TB drives
(But only when the manufacturers reverse their rip off price controlling… might be a long wait lol) most likely in the region of 20 x 4TB drives perhaps even the 5TB that are due for end of year release… if I’m lucky they may bring on the 6tb at the same time rather than delay them for another year.
From my novices position I KNOW I need maximum sata ports on the board (minimum of ten as opposed to the normal 8)
As with my current build boards to beadded to increase the number…
Graphics cards perhaps two so the pci slots need to be spaced and again best suited to utilise all I need so I can FIT the card adapter to give the extra sata’s
I’ll use a minimum of 1000/1200 PSU
But I’m after as much advice as poss from you skilled peeps in the know!
I am not sure exactly what
I am not sure exactly what you mean by “best”. With OpenCL support in a lot of the more recent content creation apps the line between a “gaming” rig and a media production rig is blurring.
Based on your description, either a LGA2011 or LGA 1150/1155 will smoke your AMD 6 core. If you need more than 32 GiB of RAM (or 2 CPU sockets), then LGA 2011 is the answer.
I would not worry too much about the number of SATA ports on a given mother board when you can buy cards like these: http://www.newegg.ca/Product/Product.aspx?Item=N82E16816118127
I would also separate out the storage of media from the production computer. Personally I would use a higher end Synology for the storage, and then build a high end PC to do the actual work on.
My current setup is 19 hard drives stuffed into my “old” Core i7 920 as a storage server, with the media creation/manipulation (mostly multi-track audio, some blender for 3d) on a high end LGA1155 based PC. I will be replacing the i7 920 with a synology within the next year.
Hth,
Awesome info Hth
I’m not
Awesome info Hth
I’m not doing editing (perhaps one day tho)
imagine a 24/7 media usage plus web and photoshop on the smaller 27-32″ screens
My current set up likes to hang occasionally when I’m viewing a movie and shifting from archive to archive (as I’m constantly having to rearrange to keep some sort of order with my 32 Terrible bitties of audio and video files etc.
so from THAT info I don’t want to throw money on boards that will offer 100 abilities that I’d simply NEVER use
But on the other hand I DO want to erradicate (as much as possible) the occasional hang up when multitasking.
Thanks once again for the positive feedback …
it’s going a LONG WAY toward enlightening me as to what I actually need and what I don’t
as well as what da hell I’m doing lol