IOMeter – IOps
Iometer is an I/O subsystem measurement and characterization tool for single and clustered systems. It was originally developed by the Intel Corporation and announced at the Intel Developers Forum (IDF) on February 17, 1998 – since then it got wide spread within the industry.
Meanwhile Intel has discontinued to work on Iometer and it was given to the Open Source Development Lab (OSDL). In November 2001, a project was registered at SourceForge.net and an initial drop was provided. Since the relaunch in February 2003, the project is driven by an international group of individuals who are continuesly improving, porting and extend the product.
We are running new version of IOMeter, but with a similar configuration as compared with prior versions (i.e. compressibility of data, etc), as to maintain consistency across the test data pool.
Light desktop usage sees QD figures between 1 and 4. Heavy / power user loads run at 8 and higher. Most SSD's are not capable of effectively handling anything higher than QD=32, which explains the plateaus.
Regarding why we use this test as opposed to single-tasker tests like 4KB random reads or 4KB random writes, well, computers are just not single taskers. Writes take place at the same time as reads. We call this mixed-mode testing, and while a given SSD comes with side-of-box specs that boast what it can do while being a uni-tasker, the tests above tend to paint a very different picture.
The Vertex 460 powered through this test with no issue. Results were on the high side of the pack. A note about these tests – the Samsung 840 EVO appears to run out of steam mid way through the sequence. This is actually due to it saturating its SLC cache. You wouldn't see this performance hit in typical use – not unless you wrote several GB of data at maximum speed.