Specifications and Packaging

Specifications

The NZXT H440 chassis is designed for enthusiasts who want easy assembly, excellent cooling, and numerous drive location options in a stylish mid-tower case. The H440 features a door-less design with no external drive bays for a clean look. It comes with a 3/4 window on the left side panel and includes four NZXT FN V2 fans, three mounted in the front blowing in and one in the back blowing out. This provides excellent air cooling and results in positive air pressure inside the case, which along with the two included air filters helps keep dust out. The H440 is also water-cooling friendly with support for radiators on the front, top, and/or rear panels.

Internally, the H440 can support up to eight 3.5”/2.5” HDDs/SSDs. There are five removable drive trays in the front which can mount either 3.5” or 2.5” drives, and there is a sixth location on the bottom panel underneath the removable trays. And finally, there are two 2.5” drive trays mounted on top of the power supply section shroud, below the motherboard area.

H440 Mid-Tower Case Specifications (Courtesy of NZXT):

120mm NZXT FN V2 Case Fan Specifications (Courtesy of NZXT)

140mm NZXT FN V2 Case Fan Specifications (Courtesy of NZXT)

Packaging and Includes

Our review sample arrived double boxed for added protection and the case came wrapped in plastic and protected by two large Styrofoam inserts.

Located inside the case in one of the HDD drive trays is a small box that contains a hand full of wire ties, an NZXT case badge, and five bags of mounting hardware. A small NZXT Product Guide is also included.

NZXT H440 Mid-Tower Case Hardware:
•    (4) 6-32 Hex screws
•    (1) Stand off
•    (4) 5×10 Fan screws
•    (36) 6-32 Flat head screws
•    (36) M3x5 Flat head screws

« PreviousNext »