As Intel's next generation enthusiast desktop platfom gets closer to fruition, several leaks (such as Gigabyte's X99 manual) and motherboard teasers have surfaced on the Internet. A few days ago, EVGA posted a teaser photograph of an upcoming "next generation" Micro ATX motherboard on its Instagram page.
The so-called EVGA X99 Micro is set to be the company's smallest Classified-branded X99 chipset offering supporting multiple graphics cards, DDR4 memory, and (of course) Intel's upcoming Haswell-E processors. The all-black motherboard features black heatsinks over the PCH and power delivery hardware. It is outfitted with a 10-phase VRM that feeds the CPU socket (socket 2011-3), two DDR4 memory sockets on each side of the processor socket, three PCI-E 3.0 x16 slots (just enough to max out a Core i7-5820K), one M.2 connector, and six SATA III 6Gbps ports. The board will support USB 3.0 and USB 2.0 ports, but beyond that it is difficult to say what the exact rear IO port configuration will be as a metal shield blocks off the ports in the teaser photo. There is an eight pin CPU power connector along with a 24-pin ATX connector for getting power to the board. Overclockers will be further pleased to see physical power and reset buttons.
According to Maximum PC, this pint sized Classified motherboard will be priced around $250 USD making it one of the most expensive mATX motherboards around. As part of EVGA's Classified series, it should be packing plenty of overclocking friendly features in the UEFI firmware and hardware build quality. This could make for one heck of a powerful small form factor system though, and I'm looking forward to seeing what people are able to get out of this board (especially when it comes to overclocking Haswell-E)!