What happens when you unlock an AMD Fury to have the Compute Units of a Fury X, and then overclock the snot out of it using LN2? User Xtreme Addict in the HWBot forums has created a comprehensive guide to do just this, and the results are incredible.
Not for the faint of heart (image credit: Xtreme Addict)
"The steps include unlocking the Compute Units to enable Fury X grade performance, enabling the hotwire soldering pads, a 0.95v Rail mod, and of course the trimpot/hotwire VGPU, VMEM, VPLL (VDDCI) mods.
The result? A GPU frequency of 1450 MHz and HBM frequency of 1000 MHz. For the HBM that's a 100% overclock."
Beginning with a stock ASUS R9 Fury STRIX card Xtreme Addict performed some surgery to fully unlock the voltage, and unlocked the Compute Units using a tool from this Overclock.net thread.
The results? Staggering. HBM at 1000 MHz is double the rate of the stock Fury X, and a GPU core of 1450 MHz is a 400 MHz increase. So what kind of performance did this heavily overclocked card achieve?
"The performance goes up from 6237 points at default to 6756 after unlocking the CUs, then 8121 points after overclock on air cooling, to eventually end up at 9634 points when fully unleashed with liquid nitrogen."
Apparently they were able to push the card even further, ending up with a whopping 10033 score in 3DMark Fire Strike Extreme.
While this method is far too extreme for 99% of enthusiasts, the idea of unlocking a retail Fury to the level of a Fury X through software/BIOS mods is much more accessible, as is the possibility of reaching much higher clocks through advanced cooling methods.
Unfortunately, if reading through this makes you want to run out and grab one of these STRIX cards availability is still limited. Hopefully supply catches up to demand in the near future.
A quick look at stock status on Newegg for the featured R9 Fury card