UEFI Features continued, Advanced Mode continued
The following screens detail settings on the Advnaced, Monitor, Boot, Tools, and Exit tabs in the Advanced Mode interface.
Advanced tab
Advanced tab, USB Configuration page
Advanced tab, USB Configuration page, USB Single Port Control page
Advanced tab, Network Stack Configuration page
Advanced tab, Onboard Devices Configuration page
Advanced tab, Onboard Devices Configuration page continued
Advanced tab, APM page
Advanced tab, HDD/SSD SMART Information page
Advanced tab, Intel(R) Thunderbolt page
Advanced tab, Intel(R) Rapid Storage Technology page
Monitor tab, Temperature and fan speed settings
Monitor tab, Fan speed and voltage settings
Monitor tab, Q-Fan Control settings
Boot tab
Boot tab, Boot Priority and Override settings
Tool tab
Tools tab, ASUS Overclocking Profile page
Tools tab, ASUS Overclocking Profile page continued
Tools tab, ASUS Overclocking Profile page, Load / Save profile page
Tools tab, Graphics Card Information page
Tools tab, Graphics Card Information page, GPU Post page
Tools tab, ASUS SPD Information page
Help popup
Q-fan popup
EZ Tuning Wizard popup
From the specs:
DVI-D with
From the specs:
DVI-D with max. resolution 1920 x 1200 @ 60 Hz
That looks like a dual link DVI connector which should have a max resolution of 2560×1600.
I understand what it actually
I understand what it actually is, but, in most pictures that Sata Express port looks a lot like an IDE connector. It certainly brings back memories.
What does this BLK
What does this BLK overclocking capability mean for non-k chips? It looks like it is a much more viable option for skylake than it has been for many generations.
for both, it decouples the
for both, it decouples the PCIe clock from the base clock so your PCIe clock remains static no matter what. However, your memory speed is still tied to the base clock value. For non-K overclocking specifically, it is still bound to the limits of what speed your CPU can run at. Should be easier than with a Z97, but still constrained because you cannot change the CPU ratio – your memory may not like odd base clocks as much…
It looks like there are a
It looks like there are a bunch of memory strap options as well though. The article states that they got the BLK up to 266 from 100. That seems to be a huge amount of headroom.
I’m having a nightmare with
I’m having a nightmare with the onboard ethernet (I219-V) on this board.
The moment I install the Intel ethernet driver (version 12.13.17.4), the system will not reboot. It makes it past the splash screen and I’m then left with a blinking cursor in the top left of the screen. It seems as if the SSD isn’t being recognised?
I’ve searched for a other/newer versions of the driver on both the Asus and Intel sites but cannot come up with any alternatives. So frustrating…
The non-K OC is really easy
The non-K OC is really easy and can be done within few minutes. Depending on the CPU you can increase the clock between 15-70% without any problems.
Pre-Skylake CPUs such as Haswell or Devils Canyon could only be overclocked by about 3-5% using the BCLK because the BCLK was still tied to the DMI and the PCIe.
However, for Skylake CPUs, BCLK and PCIe have a dedicated reference clock which always stays at 100 MHz – no matter how you change the BCLK. In other words: You can push the BCLK without worrying about other components.
The non-K BIOS is skipping some parts of the power-management, so there are few things you have to keep in mind:-
1) The missing power-management will not allow to read out any core temperature. No matter which tool you use, it will always just read 100°C.
2) No C-States. CPUs will always run full speed and full voltage.
3) No Turbo-Mode.
4) No iGPU.
5) Intel AVX is screwed. Some benchmarks like Intel XTU use AVX and you will have about 4-5 times lower score. As far as I know no game is using AVX so it’s no problem to use this for gaming rigs. Not suitable for professional usage though.
6) Avoid high memory clocks. Everything around 2600 MHz will be fine.
Follow this link for a complete OC guide:-
http://overclocking.guide/asus-z170-non-k-overclocking-guide/
My ASUS-Z170-A motherboard
My ASUS-Z170-A motherboard bios; Under ‘Tools’ tab, the ‘Graphics Card Information’ does not exist. Could you please tell me what is wrong? (CPU: Intel core I5-6600k).
I am sorry, my mistake. It is
I am sorry, my mistake. It is a H110M-D D3 Asus motherboard.
Would a be quiet Dark Rock
Would a be quiet Dark Rock Pro 3 CPU Cooler be compatible with this motherboard? I think the backplate might come into contact with that troublesome chip…