CPU Cooler Fit and Included Accessories
CPU Cooler Fit
To test the amount of space surrounding the CPU socket, we mounted the Noctua NH-D15 cooler to the CPU socket. This behemoth CPU air cooler sports a dual fan construction and two huge vertical cooling towers.
The cooler mounts to the board without issue with adequate room provided by the board's design along almost all sides of the cooler. The size of the cooler and the proximity of the primary PCIe x16 slot to the CPU socket makes the primary slot unusable with the cooler mounted.
The close-up views of the cooler mounting illustrate just how well ASUS designed the CPU socket and component layout, minimizing interference between all sized coolers and the board components / VRM coolers.
The Noctua hold down mechanism is large enough to quickly determine exactly how much space is available around the CPU socket. The Noctua mounts fits the socket area well, and does not come into contact with any of the board's integrated components or heat sinks.
The cooler's backplate rests on the socket backplate, minimizing the risk of direct board contact.
Included Accessories
The Maximus VIII Gene motherboard comes with all the necessary components to get the board up and running.
The manual included with the Maximus VIII Gene does not disappoint, written in the clear and detailed language we've come to expect from ASUS motherboard manuals. Also included is a driver DVD with all necessary hardware drivers and Window's utilities, ROG case badges, and ROG case labels. The case labels can be used to label SATA cables, hard drives and SSDs, as well as Keybot-related function keys.
The board's rear panel shield is an aluminum plate with the port identifying text and icons stamped into its surface. Under good lighting, the text and icons are easy to read, but would be challenging to see under poor lighting conditions.
ASUS bundled in four black and white 6Gb/s rated SATA cables for use with the integrated port. The cables have integrated port locks and a mix of straight and 90 degree connectors.
For multi-GPU use, ASUS included a single two-way NVIDIA SLI connector.
For use with the on-board front panel header, ASUS included one of their Q-Connector header plugs. You simply plug the front panel case leads into the Q-Connector, then plug the Q-Connector into the appropriate board header. It makes the installation of the front panel plugs much easier.
ASUS included a CPU installation tool with the motherboard to ensure easy and proper CPU installation into the board's socket. You simply snap the plastic guide over top of the CPU and place the CPU in the socket with the "This Side Up" arrow placed near the socket hinge. The plastic guide remains in place when you lock the CPU into the socket.
ASUS also included an ROG-branded door hanger.
Am I reading the specs
Am I reading the specs correctly?
Multi-GPU Support :
– Supports NVIDIA® Quad-GPU SLI™ Technology
– Supports AMD Quad-GPU CrossFireX™ Technology
How can you get Quad-GPU SLI when there’s only 2x PCIe slot?
I am surprised about the price which is about $100 less than the ASUS X99-M WS.
Two dual-GPU cards in SLI.
Two dual-GPU cards in SLI. Like an AMD Radeon 295 x2, nVidia GTX 690, or nVidia Titan Z.
When you SLI/XFire two of those dual-GPU cards together, it is seen as four GPU’s that are SLI’ed / XFire’d together.
I suppose if you put it that
I suppose if you put it that way. 🙂
Still brings some confusion because a lot don’t think about the Titan Z as a Dual-GPU card. Those are just little things that tend to be overlooked.
Oh. And the Asus X99-M WS
Oh. And the Asus X99-M WS ($280) is an X99-based chipset workstation board, while this ASUS Maximus VIII is Z170-based chipset.
X99 boards (Haswell-E) are almost always more expensive than Z170 motherboards (Skylake), because the X99 chipset is just more expensive to source from Intel.
I thought the manufacturing
I thought the manufacturing cost of the X99 would be very close to the Z170.
By the way, I’m comparing the cost in Canadian Dollars – X99 (379.99) vs. Z170 (294.99)
It’s a $50 difference. The
It’s a $50 difference. The same amount the 6700K costs more than the 5820K.
Thanks Morry, even though I
Thanks Morry, even though I am not in the market for a new mobo, I always enjoy reading your write-ups. I like that you included the NHD 15 cooler for spacing demonstrations, I think it is an excellent idea as it helps really understand the layout distances and challenges with placement of fan headers, USB 3.0, etc.for large coolers.
PCPer: I think you need to
PCPer: I think you need to get one of the VII Gene, and one of the VIII Impact, and build them both inside that Phanteks Enthoo Mini XL Dual System case down below.
Of course, I understand if you guys are too busy for that. You’re welcome to send all the parts to me and I’ll do it for you. 😀
Looks somewhat tempting,
Looks somewhat tempting, except for the lack of a DVI video port. Hopefully, Gigabyte can produce one with similar features: mATX Z170 board with Intel I219-V LAN, Realtek ALC1150 audio, USB 3.1 & these 3 video ports: DVI, DP & HDMI (no VGA). Or: wait a year for the “Kaby Lake” boards to appear.
While in general I would
While in general I would prefer a DVI port over a VGA port, chances are pretty good that the people ASUS is targeting with this board are going to have a discrete GPU (or maybe two) and won’t be using the onboard graphics ports to begin with.
I’d also think chances are pretty good that, since HDMI and DVI are electrically compatible, and HDMI-DVI converters are plentiful and cheap, they chose to keep the HDMI and include the VGA port for compatibility. Or perhaps the VGA port is required per Intel specifications. I don’t know for sure.
(oops, my bad. Doesn’t have a
(oops, my bad. Doesn’t have a VGA port. I’ll stick with my theory on HDMI-DVI converters, then. lol)
Another mATX Z170 board, with
Another mATX Z170 board, with features similar to the Asus Maximus Gene VIII:
Supermicro C7Z170-M – $299.99
http://www.newegg.com/Product/Product.aspx?Item=9SIA5EM3BS6230
Note: doesn’t show up via Newegg’s search engine, specifying “Intel motherboard – socket 1151” & “mATX”.
Currently OOS: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=9873236
eBay has several listed as “New” for under $200:
http://www.ebay.com/itm/371503778313
http://www.ebay.com/itm/391336978484
Includes:
Realtek ALC1150
Single Gigabit Ethernet LAN port (Intel i219V)
1 DVI-D, 1 DP (Display Port), 1 HDMI <--the only Intel 100 series chipset mATX board with those three IGP video port types, that I'm aware of. 6x SATA3 (6Gbps); RAID 0, 1, 5, 10 Expansion slots: 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x4, and 1 PCI-E 3.0 x1 1 PCIe M.2 (PCIe x4 2260/2280/22110) 6x USB 3.0 (4 rear + 2 via header), 4x USB 2.0 (2 rear + 2 via headers), 2x USB 3.1 (10Gbps) ports (headers) UEFI BIOS support Side note: "2x USB 3.1 (10Gbps) ports (headers)" would seem to imply requiring adding your own USB 3.1 2x port bracket, unless it might be included in the motherboard package.
Hello guys!
If I am allowed I
Hello guys!
If I am allowed I would like to make a (possible) stupid question:
does this motherboard allow to boot into Windows (10) with a NVMe M.2 SSD? Like Samsung 950/960 Pro.
I am looking to upgrade my PC and I do not find this kind of information online.
Thank you in advance.
EDIT 1:
I just went to Samsung 950 Pro video review. According to Ryan Intel Z170 chipset by default supports boot from NVMe M.2, since this is a Z170 motherboard I guess I already have my answer.
Still if someone can confirm that would be nice!