Introduction, Specifications and Packaging
Smallest RevoDrive yet, but how does it perform?
The OCZ RevoDrive has been around for a good long while. We looked at the first ever RevoDrive back in 2010. It was a bold move for the time, as PCIe SSDs were both rare and very expensive at that time. OCZ's innovation was to implement a new VCA RAID controller which kept latencies low and properly scaled with increased Queue Depth. OCZ got a lot of use out of this formula, later expanding to the RevoDrive 3 x2 which expanded to four parallel SSDs, all the way to the enterprise Z-Drive R4 which further expanded that out to eight RAIDed SSDs.
OCZ's RevoDrive lineup circa 2011.
The latter was a monster of an SSD both in physical size and storage capacity. Its performance was also impressive given that it launched five years ago. After being acquired by Toshiba, OCZ re-spun the old VCA-driven SSD one last time in the form of a RevoDrive 350, but it was the same old formula and high-latency SandForce controllers (updated with in-house Toshiba flash). The RevoDrive line needed to ditch that dated tech and move into the world of NVMe, and today it has!
Here is the new 'Toshiba OCZ RD400', branded as such under the recent rebadging that took place on OCZ's site. The Trion 150 and Vertex 180 have also been relabeled as TR150 and VT180. This new RD400 has some significant changes over the previous iterations of that line. The big one is that it is now a lean M.2 part which can come on/with an optional adapter card for those not having an available M.2 slot.
Specifications are fairly standard for current high performing NVMe parts and appear very similar to the Samsung 950 PRO, which we suspect the RD400 will be trading blows with throughout this review.
Our RD400 sample came well packaged with the 'adapter card' option (also available as standalone M.2 for a bit cheaper). Also included was a half-height mount plate.