Performance Comparisons – Mixed Burst
These are the Mixed Burst results introduced in the Samsung 850 EVO 4TB Review. Some tweaks have been made, namely QD reduced to a more realistic value of 2. Read bursts have been increased to 400MB each. 'Download' speed remains unchanged.
In an attempt to better represent the true performance of hybrid (SLC+TLC) SSDs and to include some general trace-style testing, I’m trying out a new test methodology. First, all tested SSDs are sequentially filled to 100%. Then the first 8GB span is pre-conditioned with 4KB random workload, resulting in the condition called out for in many of Intel’s client SSD testing guides. The idea is that most of the data on an SSD is sequential in nature (installed applications, MP3, video, etc), while some portions of the SSD have been written to in a random fashion (MFT, directory structure, log file updates, other randomly written files, etc). The 8GB figure is reasonably practical since 4KB random writes across the whole drive is not a workload that client SSDs are optimized for (it is reserved for enterprise). We may try larger spans in the future, but for now we’re sticking with the 8GB random write area.
Using that condition as a base for our workload, we now needed a workload! I wanted to start with some background activity, so I captured a BitTorrent download:
This download was over a saturated 300 Mbit link. While the average download speed was reported as 30 MB/s, the application’s own internal caching meant the writes to disk were more ‘bursty’ in nature. We’re trying to adapt this workload to one that will allow SLC+TLC (caching) SSDs some time to unload their cache between write bursts, so I came to a simple pattern of 40 MB written every 2 seconds. These accesses are more random than sequential, so we will apply it to the designated 8GB span of our pre-conditioned SSD.
Now for the more important part. Since the above ‘download workload’ is a background task that would likely go unnoticed by the user, we also need is a workload that the user *would* be sensitive to. The times where someone really notices their SSD speed is when they are waiting for it to complete a task, and the most common tasks are application and game/level loads. I observed a round of different tasks and came to a 200MB figure for the typical amount of data requested when launching a modern application. Larger games can pull in as much as 2GB (or more), varying with game and level, so we will repeat the 200MB request 10 times during the recorded portion of the run. We will assume 64KB sequential access for this portion of the workload.
Assuming a max Queue Depth of 4 (reasonable for typical desktop apps), we end up with something that looks like this when applied to a couple of SSDs:
The OCZ Trion 150 (left) is able to keep up with the writes (dashed line) throughout the 60 seconds pictured, but note that the read requests occasionally catch it off guard. Apparently if some SSDs are busy with a relatively small stream of incoming writes, read performance can suffer, which is exactly the sort of thing we are looking for here.
When we applied the same workload to the 4TB 850 EVO (right), we see an extremely consistent and speedy response to all IOs, regardless of if they are writes or reads. The 200MB read bursts are so fast that they all occur within the same second, and none of them spill over due to other delays caused by the simultaneous writes taking place.
Now that we have a reasonably practical workload, let’s see what happens when we run it on a small batch of SSDs:
From our Latency Percentile data, we are able to derive the total service time for both reads and writes, and independently show the throughputs seen for both. Remember that these workloads are being applied simultaneously, as to simulate launching apps or games during a 30 MB/s download. The above figures are not simple averages – they represent only the speed *during* each burst. Idle time is not counted.
The 960 EVOs do fall slightly behind both the 960 and 950 PRO, but they do turn in faster write speeds during these simultaneout operations, no doubt thanks to the TurboWrite cache speeds, which exceed the write speeds of the 960 PRO in MLC mode.
Now we are going to focus only on reads, and present some different data. I’ve added up the total service time seen during the 10x 400MB reads that take place during the recorded portion of the test. These figures represent how long you would be sitting there waiting for 4GB of data to be read, but remember this is happening while a download (or another similar background task) is simultaneously writing to the SSD.
With excellent read performance, Samsung rides the top section of this comparison chart.
Hmm, maybe add 850 evo raid
Hmm, maybe add 850 evo raid into the chart? Obviously testing every single drive in raid takes way too long, but raid 850 evo or raid of a budget drive seems like an interesting data point that doesn’t take way too long.
As tempting as it may be I
As tempting as it may be I cannot find myself ever buying a TLC drive for anything other than a scratch drive, cache drive etc.
Why? Because of the lifespan
Why? Because of the lifespan of TLC drives?
https://us.hardware.info/reviews/4178/hardwareinfo-tests-lifespan-of-samsung-ssd-840-250gb-tlc-ssd-updated-with-final-conclusion
As an AMD owner, I’d love to
As an AMD owner, I’d love to see benchmarks of this on a motherboard with a PCIe 2.0 4x m.2 connector (like the Gigabyte 990fx-gamer). Does it completely saturate the 20Gb/s bandwidth?
Wow, poor showing in the
Wow, poor showing in the Intel 600p. I feel bad for those who upgraded to the Intel drive on the assumption NVME would be a big boost over a SATA6GB SSD.
The Client QD weighted chart makes it look like it might actually be worth upgrading from a SATA to NVME SSD for real world performance.
I’m curious where the OEM LiteON SSD in my Dell laptop would fit into the mix.
Awesome review. Really like
Awesome review. Really like the detailed info about the topic. I would love to ask one thing about these drives. Will I gain any performance boost by moving from X79 (DMI 1) to Z170 (DMI 3) ?
Thanks 😉
question about endurance or
question about endurance or TBW ssd 960 evo 250gb.
it’s said 100 TBW but is it true
for for example i have ssd mx300 and according to crucial software
and other software like crstal disk the total write is 500000gb and life of the ssd around 15%, in the website of crucial the TBW of the ssd 160 TBW so it clean way above that.
i am interesting in buying the SSD 960 evo 250GB SO MY QUESTION IS :
WHAT IS THE REAL TWB OF THE SSD 960 EVO or the max write of the ssd until it die ?