Hong Kong based Inno3D recently introduced a single slot graphics card using NVIDIA’s mid-range GTX 1050 Ti GPU. The aptly named Inno3D GeForce GTX 1050 Ti (1-Slot Edition) combines the reference clocked Pascal GPU, 4GB of GDDR5 memory, and a shrouded single fan cooler clad in red and black.
Around back, the card offers three display outputs including a HDMI 2.0, DisplayPort 1.4, and DVI-D. The single slot cooler is a bit of an odd design with an thin axial fan rather than a centrifugal type that sits over a fake plastic fin array. Note that these fins do not actually cool anything, in fact the PCB of the card does not even extend out to where the fan is; presumably the fins are there primarily for aesthetics and secondarily to channel a bit of the air the fan pulls down. Air is pulled in and pushed over the actual GPU heatsink (under the shroud) and out the vent holes next to the display connectors. Air is circulated through the case and is not actually exhausted like traditional dual slot (and some single slot) designs. I am curious how the choice of fan and vents will affect cooling performance.
Overclocking is going to be limited on this card, and it comes out-of-the-box clocked at NVIDIA reference speeds of 1290 MHz base and 1392 MHz boost for the GPU’s 768 cores and 7 GT/s for the 4GB of GDDR5 memory. The card measures 211 mm (~8.3”) long and should fit in just about any case. Since it pulls all of its power from the slot, it might be a good option for those slim towers OEMs like to use these days to get a bit of gaming out of a retail PC.
Inno3D is not yet talking availability or pricing, but looking at there existing lineup I would expect a MSRP around $150.