Introduction, Specifications and Packaging
Second gen IMFT 3D NAND
Today Intel is launching a new line of client SSDs – the SSD 545S Series. These are simple, 2.5" SATA parts that aim to offer good performance at an economical price point. Low-cost SSDs is not typically Intel's strong suit, mainly because they are extremely rigorous on their design and testing, but the ramping up of IMFT 3D NAND, now entering its second generation stacked to 64-layers, should finally help them get the cost/GB down to levels previously enjoyed by other manufacturers.
Intel and Micron jointly announced 3D NAND just over two years ago, and a year ago we talked about the next IMFT capacity bump coming as a 'double' move. Well, that's only partially happening today. The 545S line will carry the new IMFT 64-layer flash, but the capacity per die remains the same 256Gbit (32GB) as the previous generation parts. The dies will be smaller, meaning more can fit on a wafer, which drives down production costs, but the larger 512Gbit dies won't be coming until later on (and in a different product line – Intel told us they do not intend to mix die types within the same lines as we've seen Samsung do in the past).
There are no surprises here, though I am happy to see a 'sustained sequential performance' specification stated by an SSD maker, and I'm happier to see Intel claiming such a high figure for sustained writes (implying this is the TLC writing speed as the SLC cache would be exhausted in sustained writes).
I'm also happy to see sensical endurance specs for once. We've previously seen oddly non-scaling figures in prior SSD releases from multiple companies. Clearly stating a specific TBW 'per 128GB' makes a lot of sense here, and the number itself isn't that bad, either.
Simplified packaging from Intel here, apparently to help further reduce shipping costs.