Asus recently took the wraps off of its X370 ROG Crosshair VI Extreme E-ATX motherboard which is the company’s new flagship motherboard for the AMD Ryzen platform. The new board is packed with features and is aimed at extreme overclockers and gaming enthusiasts.
The massive board surrounds the AMD AM4 socket with four DDR4 DIMM slots, a 12 phase Digi+ VRM, and a plethora of expansion and storage connections including two PCI-E 3.0 x16, one PCI-E 2.0 x16, three PCI-E 2.0 x1, two M.2 slots, and 8 SATA 6Gbps ports. One of the M.2 slots sits under the passive PCH heatsink and connects directly to the CPU while the other M.2 slot does not benefit from the passive heatsink and shares bandwidth with the PCI-E 2.0 lanes coming from the chipset.
The board has a massive VRM heatsink that can also be swapped out for a monoblock that can be integrated into a custom water cooling loop with ASUS partnering with Bitspower for a monoblock that will be sold separately (the board will also work with monoblocks from other manufacturers) and will include sensors to measure flow rate, temperature, and leak detection. The board also has a header that will allow you to attach those same sensors to another point in your loop with all the sensor data being available through ASUS’ Fan Xpert 4 software. There are 13 fans headers on board (16 with fan extension card) with one dedicated pump header and two groups of four fan headers that are placed closed together to make wiring up radiators a bit cleaner. The X370 ROG Crosshair VI Extreme also sports multiple RGB LED lighting zones and two headers that will allow users to extend the lighting to RGB LED strips, fans, and cases (one header is for addressable LEDs and the other is for standard LED strips up to 3A). The on board lighting zones include the IO and VRM cooler, the two SafeSlot (metal-reinforced) PCI-E x16 slots, the chipset heatsink, and the right edge of the board. The audio jacks are also LED color coded which is actually kind of cool since it can be hard to see what colors the jacks are when the case is under a desk! Other useful features include an ROG backplate and a right angle 24-pin power connector to make cable management a bit easier. There are also the usual overclocker friendly error code display, power and reset buttons, and voltage read points for multimeters. Further, the board features a dedicated base clock generator and a “TPU” (TurboV Processing Unit) that helps manage voltage to the VRMs and controls the clock generator. The external clock generator is important when overclocking Ryzen and hitting extremely high memory frequencies.
Asus is using an Intel I211-AT Gigabit Ethernet controller for the wired networking and there is also support for Intel 8265-powered 802.11 ac Wi-Fi. Sound is handled by a SupremeFX S122 codec paired with ES9023P ESS Sabre DAC with high end capacitors and TI op-amps for a 113 dB line in (for recording) and 120 dB output.
Rear I/O is where the Extreme board is a bit wanting with:
- 2 x Antenna connectors
- 2 x USB 3.1 Gen 2
- 6 x USB 3.1 Gen 1
- 4 x USB 2.0
- 5 x Gold plated 3.5mm jacks
- 1 x S/PDIF (Optical)
- 2 x Clear CMOS and BIOS Flashback buttons
On one hand, I am not sure what else they could have included (Thunderbolt is really the only missing thing and not strictly needed), but it does look a bit barren even compared to the Crosshair VI Hero.
Asus’ flagship AMD AM4 motherboard will be available in early August with an MSRP of $349.
I am interested to see if the X370 ROG Crosshair VI Extreme really does up the ante especially in the overclocking department versus the ROG Crosshair VI Hero which seems to be a popular choice for overclockers aiming to break records. I am looking forward to reviews to see whether the $100 premium is worth it (the Crosshair VI Hero is $245 or $270 with AC Wi-Fi).
Personally, I think I would rather go with a cheaper motherboard and better graphics card or SSD, but for those not on a budget I can see them opting for the board with all the bells and whistles (and RGB)!